VEX High Strength Gear Kit

Toughen Up!
Build mechanisms capable of withstanding higher stresses than ever before. Lift heavier loads, and survive bigger impacts with the High Strength Gear Kit.

In stock
Only 1 left

This kit provides several new gears with features to handle higher loads. Each of these gears has a wider face width; this means each tooth is wider so applied loads will be spread over a larger area. The 12-tooth High Strength Gear is molded out of powdered metal. The 36-tooth and 60-tooth Gears have powdered metal inserts. These metallic components will protect the gear from high loads applied by a VEX axle.

High strength gears mate with all VEX spur gears.
Double-thick face width provides added tooth strength.
Metal Square Hole Inserts prevent axles from "stripping".
Use metal pinions for high strength where it counts.
Use the round-hole inserts to build free spinning idler gears.
Build gearboxes that resist high shock-loads.
Bolt Gears together for added strength.

More Information
Data Sheets

Kit Contents:
(4)High Strength 12-tooth Gear (0.58 inch diameter).
(4)High Strength 36-tooth Gear (1.58 inch diameter).
(4)High Strength 60-tooth Gear (2.58 inch diameter).
(16)High Strength Square Gear Insert.
(16)Free Spinning Gear Insert.
(1)Inventor's Guide Insert.
Compatibility : High strength gears mate with all VEX spur gears, All VEX Square Shafts 0.125" (3.2mm).
Material Type:
Metal: 12-tooth Ggear, Square Gear Insert.
Delrin: 36-tooth Gear, 60-tooth Gears, Free Spinning Insert.
Gear Type: Spur.
Diametral Pitch: 24.
Pressure Angle: 20 degrees.
Face Width: 0.500" (12.7mm).

We found other products you might like!