DF Robot

Robot Mesh is an authorized DF Robot re-seller in the USA

A selection of robotics kits can be found below. Use the categories on the left-side to find a wide-range of DF Robot products.

Items 1 to 60 of 229 total

Set Descending Direction
per page

Grid  List 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  • uHEX

    μHex is the first Arduino-compatible low-power controller, great for battery powered applications.

    • Hexagon design, compact size with 14 IO ports and 7 power ports
    • 4 switchable power supply interfaces to reduce power consumption
    • Two sleep-wake interfaces
    • Designated Arduino development libraries
    • Cross design in power and IO interfaces, directly supports 3 pin/4 pin sensor/actuator
    • Large welding plate design
    • 2.54 mm standard spacing plate
    Learn More
    $6.95

  • FT232 USB to TTL Serial Cable

    This FT232 USB to TTL Serial Cable has a FT232 conversion chip, and provides up to 5V power output with a self-healing fuse.

    Learn More
    $9.95

  • IO Expansion Shield for Bluno M3

    This is an IO expansion shield for the DFRobot family of sensors. Learn More

    $14.95

  • Bluno M3

    The Bluno M3 is an Arduino-compatible microcontroller board using the ARM® Cortex® M3 processor. Learn More

    $24.95

  • Romeo BLE Mini

    The Romeo BLE Mini is a very small Arduino-compatible microcontroller board for robotics applications. Learn More

    $19.95

  • UV Sensor v2

    This UV Sensor with a GUVA-S12SD chip detects the UV raditation in sunlight. Learn More
    $5.90

  • IO Expansion Shield for Intel® Edison (without Edison)

    The IO Expansion Shield for Edison bridges the gap between the Intel® Edison, and DFRobot's wide range of sensors and other accessories.

    Learn More
    $11.95

  • Romeo BLE

    Romeo is an all-in-one Arduino-compatible microcontroller especially designed for robotics applications. The integrated 2 channel motor driver and built-in Bluetooth Low-Energy radio module make this a single-board solution for building your own Arduino-powered robot. Learn More

    $34.99

    Out of stock

  • USB BLE-Link

    Low-Energy compatible Bluetooth 4.0 USB dongle. Learn More
    $7.95

  • FAN Module

    Make an aerial propeller vessel, a cooling system, or spinning machine with this small fan module. It comes with a propeller, a 15,000 rpm motor and cable.

    Learn More
    $4.95

  • Dreamer Maple - A 32-bit ARM Cortex-M3 Powered Microcontroller

    The Dreamer Maple is a microcontroller board based on the STM32F103RET6 microprocessor. It runs at a maximum of 72 MHz, has 43 digital input/output pins, 15 analog inputs, native full speed USB, 3 USARTs (hardware serial ports), integrated SPI/I2C support, a power jack, and a reset button. Learn More

    $24.95

  • Si7021 Temperature and Humidity Sensor

    This module is based around the Si7021 Temperature and Humidity Sensor. Learn More

    $12.95

  • Raspberry Pi GPIO Extension Board

    This module is based around the 74HC244, 74HC125 and SI2303 5V to 3.3V logic level conversion ICs. Learn More

    $5.99

  • LX1972 Analog Light Sensor

    This module is based on the LX1972 analog light sensor. Learn More

    $3.50

  • TEMT6000 Ambient Light Sensor

    This module is based on the TEMT6000 analog light sensor. Learn More

    $4.95

  • PIR Motion Sensor v1.0

    Passive infrared motion sensors can detect movement of objects warmer than ambient temperatures within their field of view.

    Learn More
    $4.90

  • IO Expansion Shield For Arduino (V6)

    The DFRobot IO expansion board is evolving, the latest V6 IO expansion shield is now supporting Xbee and has color coded pin header. Learn More

    $11.95

  • RS-232 to RS-485 Converter

    This is a simple optioisolated RS232 to RS485 converter that is self powered using the TX, RX or RTS, CTS signals for power. The RS232 side is a DB9 female connector, and the RS422 side is a DB9 male or 4 position terminal block.

    It converts RS232 signals to RS485 balanced differential signals and extend the communication distance to 1200 meters.

    Learn More
    $9.95

  • RS485 Sensor Node V1.0

    This RS-485 Sensor node provides 6 analog inputs and 1 SHT1x Humidity & Temperature digital input. The RS485 protocol supports up to 254 nodes at 1200m distance between each node.
    Learn More
    $19.95

  • Beetle Shield

    The Beetle shield is designed to attach to Beetle (DFR0282) controller to make it easy to connect servos and sensors.

    Learn More
    $1.95

  • USB Power Detector

    Handy and compact, this USB power meter displays both charging voltage and current.

    Learn More
    $9.95

  • Sharp GP2Y1010AU0F Compact optical Dust Sensor

    The Sharp Optical Dust Sensor (GP2Y1010AU0F) is especially effective in detecting very fine particles like cigarette smoke.

    Learn More
    $8.95

  • DHT22 Temperature and Humidity Sensor

    DHT22 is a compound digital temperature and humidity sensor which outputs calibrated digital signals. Thanks to the dedicated digital module acquisition technology and temperature and humidity sensing technology applied to the module, DHT22 comes with very high reliability and excellent long-term stability.

    Learn More
    $7.95

  • Digital Push Button - White

    These redesigned digital push buttons come with LED, immersion gold surface, and bright colored hats. A captital D at left corner indicates that it is a digital sensor. An illustration of button painted in the back notifying its function. Pressing it is a real fun, especially with the plastic cap off. The long pressable life also ensures its durability.

    Learn More
    $1.95

  • Digital Push Button - Green

    These redesigned digital push buttons come with LED, immersion gold surface, and bright colored hats. A captital D at left corner indicates that it is a digital sensor. An illustration of button painted in the back notifying its function. Pressing it is a real fun, especially with the plastic cap off. The long pressable life also ensures its durability.

    Learn More

  • Digital Push Button - Blue

    These redesigned digital push buttons come with LED, immersion gold surface, and bright colored hats. A captital D at left corner indicates that it is a digital sensor. An illustration of button painted in the back notifying its function. Pressing it is a real fun, especially with the plastic cap off. The long pressable life also ensures its durability.

    Learn More

  • Digital Push Button - Red

    These redesigned digital push buttons come with LED, immersion gold surface, and bright colored hats. A captital D at left corner indicates that it is a digital sensor. An illustration of button painted in the back notifying its function. Pressing it is a real fun, especially with the plastic cap off. The long pressable life also ensures its durability.

    Learn More

  • Digital Push Button - Yellow

    These redesigned digital push buttons come with LED, immersion gold surface, and bright colored hats. A captital D at left corner indicates that it is a digital sensor. An illustration of button painted in the back notifying its function. Pressing it is a real fun, especially with the plastic cap off. The long pressable life also ensures its durability.

    Learn More

  • DFR mega2560 V3.0 (Arduino mega 2560 R3 compatible)

    This is the updated DFRduino Mega 2560 V3.0 which is now fully compatible with Arduino Mega 2560 R3. The Arduino Mega is a microcontroller board based on the ATmega2560. It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the Arduino Duemilanove, Diecimila or Uno.
     
    One cool thing about our DFRduino microcontrollers is that the headers with different colors are used to differentiate I/O ports in a relatively easy way: red indicates Power Section, blue indicates Analog I/O and green indicates Digital I/O. This kind of correspondence match exactly the same with our sensors, making it even cooler and more user-friendly.
    Learn More
    $15.95

    Out of stock

  • Magnet Micro USB Cable 1.2m

    Simple and practical design with bold color. Gold plating assures quality and efficiency of data transmission. Enhanced endurance with full gold-plated interface also provides faster and more stable data transfer and power supply. Unique wide flat design eliminates tangled data lines; a clever solution for portable needs and easy storage.

    Learn More

  • Rubber Wheels

    These rubber wheels (sold in pairs) can be used the DFRobot 4WD mobile platforms. They can be mounted directly onto micro gear motors;and are also compatible with most DFRobot servos.

    Learn More

  • Gripper - Extra Width

    This is a 2 DOF robot gripper that can be installed with 2 servos so as to control gripper opening and closing with one servo, and steering gear motion control (or rotation) with the other servo.

    Velocity range is 0 to 54 mm. Total weight about 45 g. The servo slot fit most servos such as Hitec HS422, Hitec HS475, DF05BB, DF15MG servo.
    Learn More
    $14.90

  • Beetle (1Pc)

    The new generation "Beetle" controller derives its core notion from minimalism without compromising functionality. It comes with Atmel AtMega32u4 (datasheet) @16MHz clock time and has an expanded number of interfaces: 10 digital pins, 5 analog pins and 4 pwm pins. To further make it user-friendly, it is compatible with Micro USB so that direct programming and testing is no longer a headache. Select "Arduino Leonardo (tools >board > Arduino Leonardo in Arduino IDE), the ATmega32U4 comes preburned with a boot-loader that allows you to upload any new code that is applicable to Arduino Leonardo.

    As a minimized version of Arduino Leonardo, it enjoys similar powerful functions. Beetle aims to solve problems of low-cost controller, ease-of-use and a low-cost solution for disposable projects, such as DIY and educational projects, workshops, gift projects or e-textiles. For students and makers on a hardware purchasing budget the Beetle can be a great solution.

    Learn More

    Out of stock

  • Ethernet Shield for Arduino - W5200

     This Arduino-sized Ethernet Shield is based on the Wiznet W5200 Ethernet Chip, and provides an easy way of getting your Arduino online.

    Learn More
    $19.95

  • Light Bar - Super Bright Red (13x13mm)

    This Super Bright Red light bar has a high quality, low power consumption LED. The KWL-R151 series is a 13x13mm light bar display, designed for viewing distances up to 7 meters.

    Learn More
    $0.99

  • Light Bar - Yellow Green (13x13mm)

    This Yellow green light bar has a high quality, low power consumption LED. The KWL-R151 series is 13x13mm light bar display, designed for viewing distances up to 7 meters.

    Learn More
    $0.99

  • Light Bar - Amber (13x13mm)

    This Amber light bar has a high quality, low power consumption LED. The KWL-R151 series is 13x13mm light bar display, designed for viewing distances up to 7 meters. Learn More
    $0.99

  • Built-in GPS Antenna (with amplifing function)

    This is a built-in GPS Antenna for the DFRobot LEA-5H GPS shield. This GPS Antenna also has an amplifying function. Its SMA male header can adapt to most GPS/GSM modules which have the MMCX interface. This antenna has been used on many navigation instruments and cellphones.

    Learn More
    $5.49

  • IO Expansion Shield for Arduino V7

    The new IO Expansion Shield V7 has arrived, from the best-selling family of IO expansion shields for Arduino. For the past few years these expansion shields have been aiding thousands of makers to create, expand, and share their ideas and ingenuity and now comes the latest addition, the V7.

    Learn More
    $12.95

  • Nova Basic Kit (a coin-sized Arduino Compatible Controller)

    How small a Leonardo can be? As small as a coin!!
    Is it amazing? Yes, it's true. And here it is.
    Nova----a new generation of Leonardo---super small size, super powerful functionality.
    Nova is the smallest of all Leonardo controllers. It is only 21.5mm long and 20mm wide, so that you can put it in any project with tight space requirements.
    It's also not just a Leonardo. A Triple Axis Accelerometer is integrated on this small controller. And you can read this sensor's data through IIC communication.
    Learn More
    $35.00

    Out of stock

  • Smart Grayscale Sensor

    This time we reinvented the line-tracking sensor. Beyond recognizing two specific colors or output through digital or analog only, the smart gray sensor has both digital and analog output modes.
    Learn More
    $5.95

  • Analog Ambient Light Sensor

    DFRobot's new Analog Ambient Light Sensor. New, improved, design and much more convenient to use. The environmental PT550 light sensor is more sensitive to light. This module helps you detect light density and sends the analog voltage signal back to the Arduino controller. Sensor can also be used as a digital input, setting the detection threshold on the sensor.
    Learn More

  • Digital Temperature & humidity sensor (With Stainless Steel Probe)

    This is an anti-rust, robust and precise SHT1x sensor, which can master enterprise-class and industrial-level applications. It can be applied in various fields: telepoint base stations, electronic control cabinet, production site, storehouse, machine rooms, greenhouses, animal farming, medicine stock and etc. Metallic package enables it to deal with the very dusty or other severe circumstance. the wall-hanging style makes it easy to install.
     
    The metallic mesh covering the sensor adopts method of infiltering copper during sintering to enhance the temperature resistance, pressure resistance, and wearing resistance of it. The 2-wire serial interface and internal voltage regulation allows for easy and fast system integration. Moreover, it's Arduino compatible.
    Learn More
    $24.95

  • Servo Y Extension Cable - 500mm

    This 500 mm (just under 20in) Y-cable is typically used to connect two servos to a single servo port on an RC receiver or servo controller. It has a single female JR connector connected to two male JR connectors, which means it is compatible with almost all of the RC servos.The connectors have gold-flashed contacts on a 0.1" spacing.The split occurs near the midpoint of the cable,so the two male ends can be separated by up to approximately 500mm.
    • Black: GND
    • Red:Servo power
    • White:Signal
    Learn More
    $0.99

  • Servo Y Extension Cable - 300mm

    This 300mm (just under 1ft) Y-cable is typically used to connect two servos to a single servo port on an RC receiver or servo controller. It has a single female JR connector connected to two male JR connectors, which means it is compatible with almost all of the RC servos.The connectors have gold-flashed contacts on a 0.1" spacing.The split occurs near the midpoint of the cable, so the two male ends can be separated by up to approximately 300mm.
    • Black: GND
    • Red:Servo power
    • White:Signal 
    Learn More
    $0.79

  • 16A Relay Module (Arduino Compatible)

    A relay is an electrically operated switch, which has a control system (also known as the input circuit) and the controlled system (also known as the output circuit), usually used in an automatic control circuit. Relays are used where it is necessary to control a circuit by a low-power signal (with complete electrical isolation between control and controlled circuits), or where several circuits must be controlled by one signal.
    Learn More
    $7.95

  • 8*8 Matrix

    A brand new way to play with 8*8 matrix!  This small matrix has a quicker & easier way of displaying what you want.

    Learn More
    $16.95

  • Wall Adapter Power Supply 7.5VDC 1A (American Standard)

    7.5V wall adapter, not commonly available.  The best part of this adapter is that it allows an Arduino project to run independently.  For projects that need a motor or servo, 5V may not provide sufficient power, whilst 12V can prove too much and may cause overheating. 7.5V is just the right voltage for those projects, safely providing the needed power. Comes with a  DC2.1 connector which is compatible with the Arduino power jack.  Plug&Play!

    Learn More

  • Encoder Adapter

    Encoder adapter specially designed for DFRobot 12V DC Motors

    Learn More
    $1.19

  • Smart Servo Shield for Arduino (Compatible with Dynamixel AX/MX series servos)

    Smart Servo Shield for Arduino (Compatible with Dynamixel AX/MX series servos)

    Learn More
    $18.95

  • LED Current Meter 10A (Green)

    Standard LED Current Meter 10A. Measures 0-9.99A with 2% accuracy. Best for current display in the circuit. Just apply four wires without any extra circuit or components, it gives the reading straight away.  Easy to use. Also available in red and blue. 

    Learn More
    $4.95

  • LED Current Meter 10A (Blue)

    Standard LED Current Meter 10A. Measures 0-9.99A with 2% accuracy. Best for current display in the circuit. Just apply four wires without any extra circuit or components, it gives the reading straight away.  Easy to use. Also available in green and red. 

    Learn More
    $4.95

  • LED Current Meter 10A (Red)

    Standard LED Current Meter 10A. Measures 0-9.99A with 2% accuracy. Best for current display in the circuit. Just apply four wires without any extra circuit or components, it gives the reading straight away.  Easy to use. Also available in green and blue. 

    Learn More
    $4.95

  • Rubber Wheel 136×24mm (Pair)

    DFRobot-designed black wheel for mobile robots. 

    Learn More
    $19.95

  • RGB LED Breakout (3528)

    This small size breakout is programmable full-color RGB LED for hobbyists, industrial designers, prototypers, and experimenters

    Learn More
    $1.49

  • Diode Pack (100 pcs)

    This package includes 8 types of the most commonly used diodes. It's convenient for you to make some small designs.

    Learn More
    $4.95

  • Cheapduino (5Pcs)

    CheapDuino is the most affordable Arduino compatible processor in the world. The price for each cheapDuino is almost 1/5 price of the Arduino UNO.It's aimed to supply an extremely low cost solution for any disposable projects, such as DIY projects, workshop, gifts projects, E-Textiles and education. For those students from second or third world countries who can not afford the official Arduino, cheapduino opens the door to the physical world.

    Learn More
    $15.95

  • Rotary Switch Module V1

    A rotary switch is a switch operated by rotation. It is often used when more than 2 positions are needed, such as multi-speed control. The Rotary Switch uses an analog input to read the 12 state which saves IO resource for the Arduino. This Rotary Switch Module has 12 positions. Each position has the approprite indicator. You can also adjust metal buckle inside the switch to change the position number. So, it's very flexible  to use.

    Learn More
    $4.95

    Out of stock

  • 10 Pcs 40 Pin Headers - Straight (Yellow)

    This is a yellow colored 40 Pin 2.54 mm Single Row Pin Header Strip from DFRobot

    Learn More
    $3.10

  • IR Scanner Kit (120°)

    An IR sensor with scan capability is a must have feature for most robot application. This IR scanner kit provides a cost effective way to have such feature for your robot application.

    Learn More
    $19.95

Items 1 to 60 of 229 total

Set Descending Direction
per page

Grid  List 

Page:
  1. 1
  2. 2
  3. 3
  4. 4